Placing Plastic Cards; Scanning Documents - Plustek SmartOffice PS406 Benutzerhandbuch

P P
LACING LASTIC
The plastic card can be embossed credit card, driver license, ID card, insurance
card, medic-care card or any membership card. Make sure to load the embossed face
of the embossed card face down into the scanner.
1. Horizontally load the plastic card, headfirst and face down, toward the center of
the ADF.
For single-sided scans, load the card face down.
For double-sided scans, load the card in desired order.
2. Adjust the paper width slider to the card width. The paper width slider should
be gently touching both sides of the card.
Attention
S D
CANNING
There are four different ways to operate the scanner:
1. By acquiring images from the scanner through our TWAIN interface within
any TWAIN-compliant application programs.
2. By scanning images within our DI Capture software.
3. By scanning from the buttons on the scanner front panel.
4. By scanning from DocAction's Execute menu on the screen.
The TWAIN interface, DI Capture and DocAction software is automatically installed
to your system along with the scanner driver.
C
ARDS
Make sure the plastic cards you wish to
scan are horizontally loaded into the ADF.
Maximum thickness of each plastic card is
1.2 mm.
Don't load more than 5 plastic cards per
batch.
OCUMENTS
21