Placing Business Cards; Scanning Documents - Plustek SmartOffice PN2040 Benutzerhandbuch

Attention
P B
LACING USINESS
1. Vertically load the business cards, headfirst and face down, toward the center
of the ADF and all the way into the ADF until touching the bottom.
For single-sided scans, load the business cards face down.
For double-sided scans, load the business cards in desired order.
2. Adjust the paper width slider to the business card width. The paper width
slider should be gently touching both sides of the business cards.
Attention
S D
CANNING
DO NOT load more than 50 sheets of paper
(70 g/m
Paper scanned from the ADF must be a
minimum of 9 x 5.08 cm (3.55" x 2", W x L).
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be
skewed.
Although the documents should be loaded
firmly in place ensuring optimum scanning
accuracy, they should never be wedged in so
tightly that the process of feeding them
through the scanner is strained.
Do not load additional paper into the ADF
while the unit is feeding and scanning.
C
ARDS
Don't load more than 10 business cards in one
batch.
OCUMENTS
2
, 18 lb.) to the ADF.
23