Plustek SmartOffice PN2040 Benutzerhandbuch Seite 13

2. Plug the other end of the AC adapter into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port
the scanner.
4. Plug the rectangular end of the USB cable to an available USB port on the
computer.
5. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to the
USB hub.
Using the Ethernet Cable to connect the Scanner and Your Computer
Attention
When you use the Ethernet cable to connect the scanner and your computer on the
network, please do not connect the USB cable to the scanner at the same time. If you
use both the USB cable and the Ethernet cable to connect the scanner and your
computer, only the scanner USB port is working properly, but the function of the
scanner Ethernet port will be disable. Please make sure to unplug the USB cable from
the scanner when you use the Ethernet cable to connect the scanner and your
computer.
1. Plug the AC adapter into the scanner's power receptor.
2. Plug the other end of the AC adapter into a standard AC power outlet.
3
The USB hub is not included with the scanner.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
9
at the rear of
3
, make sure that the hub is