Safety Notes; Installation Instructions; Technical Data; Symbol Description - HANSGROHE Talis S Gebrauchsanleitung, Montageanleitung

6

Safety Notes

6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 The hot and cold supplies must be of equal pres-
sures.
32855XXX:
6 Only dishwashers and washing machines certified
with the DVGW emblem may be connected to the
appliance connection valve without an additional
fuse. If no consumer is connected to the appliance
connection valve, it must be plugged.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms!

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Hansgrohe mixers can be used together with hydrauli-
cally and thermically controlled continuous flow heaters
if the flow pressure is at least 0,15 MPa.
4
English

Symbol description

max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31
Do not use silicone containing acetic acid!
To adjust the hot water limiter on single lever
mixers, please see page 32. No adjustment
is necessary when using a continuous flow
water heater.
Cleaning recommendations, see enclosed
brochure.
Dimensions (see page 33)

Flow diagram

(see page 33)
Operation (see page 35)
Spare parts (see page 34)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Test certificate (see page 36)