Custom Settings - Bosch Indego Originalbetriebsanleitung

28 | English
Note: Keep the PIN code secret from third parties.
If you have lost your personal PIN code, you will have to return
the Indego and its docking station to a Bosch Service Center
to be unlocked. Please contact your dealer or Bosch (see "Af-
ter-sales Service and Application Service").
Date & Time
Format: 12 hr
Back
Select the "hh:mm", "dd/mm" and "Format: 12 hr" input posi-
tions with the left/right cursors, adjust the values with the
up/down cursors and confirm with "Save" or select "Back" to
return to the first "PIN code" screen.
Installation
Please press Follow Wire to
complete installation process
Back
Press "Follow Wire" to complete mapping the garden.
(Select "Back" to return to the "Date & Time" screen.)
Installation
Step Back
Machine is about to start. Wire being
followed...
The following screen indicates the initial follow of perimeter
wire:
Mower Status
Mapping the garden ...
Back
The blades do not rotate when the machine follows the wire
for the first time.
F 016 L70 825 | (23.11.12)
hh:mm
dd/mm
Save
Follow Wire
Mapping Completed
Is this the back of the docking station
or an obstacle? If this is an obstacle,
remove it and machine will continue
mapping.
Obstacle
Mapping is complete when the machine reaches the back of
the docking station.
If the machine hasn't reached the back of the docking station
press "Obstacle" and observe information indicated on the
screen to complete installation.
If the machine has reached the back of the docking station
press "Docking Station".
Mapping Completed
Mapping Completed. Mower is re-
turning in the docking station.
Please wait.
Back
Robotic Lawnmower
Invented for life
Mow now
After a successful installation you can either immediately be-
gin to mow by pressing "Mow now" or set up a mowing sched-
ule in the "Menu > Select Daily Timer".
For more information about the behaviour of the machine
while mowing see section "Mowing".

Custom Settings

Configure the mowing schedules and the settings of the ma-
chine according to your needs. All menu items are listed in
section "Menu Navigation".
The set up of a "Select Daily Timer" is explained in detail. The
other menus are self explaining.
Schedule
In "Menu > Select Daily Timer" 5 schedules are available.
"MANUAL" should be used if you only want to instruct the ma-
chine to operate at the current time.
Each of the "CUSTOM" mode can be scheduled according to
your needs.
Docking
Station
Menu
Bosch Power Tools