Herunterladen Inhalt Inhalt Diese Seite drucken

HQ Power ARAZU I Bedienungsanleitung Seite 5

Vorschau ausblenden Andere Handbücher für ARAZU I:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

• DMX512 Control
Operating the ARAZU I through a DMX controller allows you to create your own tailored programs and to control
each connected ARAZU I individually. Simply connect the controller to the ARAZU I using a standard DMX cable.
Press MODE until R.XXX is displayed. Next, set the DMX address for each ARAZU I.
o Detailed DMX Values per Channel
CHANNEL
FUNCTION
1
2
3
Gobo rotation
4
5
o DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the ARAZU I. Multiple ARAZU Is can be linked through serial linking. The linking cable should be a
two-core screened cable with XLR input and output connectors.
o DMX512 Chain with Termination
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120
the XLR output socket of the last device in the chain.
Please see illustrations.
o DMX Start Address
All DMX-controlled devices need a digital start address so that the correct device responds to the signals. This start
address is the channel number from which the device starts to "listen" to the DMX controller. Enter the correct
number and read it from the display located on the base of the ARAZU I.
VDPL300SC
All manuals and user guides at all-guides.com
FROM
Shutter
0
0
8
16
24
32
40
48
56
Gobo
64
72
80
88
96
104
112
120
128
0
Pan
0
0
Tilt
136
140
TO
DESCRIPTION
255
From 0 to 100 %
7
Gobo 1
15
Gobo 2
23
Gobo 3
31
Gobo 4
39
Gobo 5
47
Gobo 6
55
Gobo 7
63
Gobo 8
71
Gobo 9
79
Gobo 10
87
Gobo 11
95
Gobo 12
103
Gobo 13
111
Gobo 14
119
Gobo 15
127
Gobo 16
255
Gobo changing
255
From 0 to 100 %
255
From 0 to 100 %
135
Forwards rotation from 0 to 100 %
139
Stop
255
Backwards rotation from 0 to 100 %
resistor between pins 2 and 3, which is then plugged into
5
HQPOWER

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vdpl300sc

Inhaltsverzeichnis