Storing Stations In Memory - JVC KS-FX222 Bedienungsanleitung

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you
want to store FM stations into.
FM FM1
2
Press and hold both buttons for
more than 2 seconds.
SSM
(For KS-FX222)
"- -SSM- -" appears, then disappears
when automatic preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons—
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
All manuals and user guides at all-guides.com
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
1
FM2 FM3
2
SSM
(For KS-F172)
preset number 1 of the FM1 band.
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
FM1
FM
AM
AM
Tune in to a station (in this example,
of 88.3 MHz).
To tune in to stations of higher frequencies
(For KS-FX222)
To tune in to stations of lower frequencies
CONTINUED ON THE NEXT PAGE
FM2 FM3
(For KS-F172)
9