Installation; Installation Requirements; General Operating Conditions; Transport - Miele PDR 914 Kurzgebrauchsanweisung

en - Installation

Installation requirements

The tumble dryer must only be installed and commissioned by Miele Customer Service
Department or an authorised dealer.

The tumble dryer must be installed in accordance with all relevant regulations and
standards.

The dryer must only be operated in a room that has sufficient ventilation and which is
frost-free.

General operating conditions

This dryer is intended only for use in a commercial environment and must only be oper-
ated indoors.
Do not install the tumble dryer in a room where there is a risk of frost.
Depending on the nature of the installation site, sound emissions and vibrations may oc-
cur.
Tip: Have the installation site inspected and seek the advice of a professional in instances
where increased noise may cause a nuisance.

Transport

The tumble dryer must not be transported without a transport pallet.
Suitable transport aids must always be used during transportation.
At the installation site, the tumble dryer must be lifted from the transport pallet using suit-
able lifting gear.

Installing the tumble dryer

Place the tumble dryer on a perfectly level, secure and horizontal surface that is able to

withstand the specified floor load.
The floor load created by the tumble dryer is concentrated and transferred to the installa-
tion surface via the adjustable feet. A base is not required. However, an uneven floor sur-
face must be compensated for.
138