Securing The Machine; Electrical Connection - Miele PDR 914 Kurzgebrauchsanweisung

en - Installation
After the machine has been aligned, screw the nuts on the adjustable feet tightly to the

base plate using an open spanner.

Securing the machine

The tumble dryer must be secured to the floor by fitting the tensioning strips supplied

over the machine feet.
Fittings supplied are for bolting the machine to a concrete floor. For other types of floor-
ing, please purchase suitable fastening materials separately.

Electrical connection

The electrical connection must be established by a qualified electrician.

The electrical connection may only be made to an electrical system provided in accord-
ance with all appropriate local and national legislation, regulations and guidelines. Please
also observe the regulations set out by your insurance provider and energy supplier, acci-
dent prevention regulations, as well as recognised codes of practice.

Reliable and safe operation of this tumble dryer is only ensured if it has been connected
to the mains electricity supply.
The required supply voltage, power rating and fuse rating can be found on the data plate
on the tumble dryer. Ensure that the supply voltage matches the voltage quoted on the
data plate before establishing the electrical connection to the tumble dryer.
Connection to a supply voltage other than the one quoted on the data plate can damage
the tumble dryer if the voltage is too high.

If more than one voltage is specified on the data plate, the tumble dryer can be conver-
ted for connection to the relevant input voltage. This conversion must be performed by the
Miele Customer Service Department or by an authorised dealer. During the conversion, the
wiring instructions given on the wiring diagram must be followed.
140