Ec Declaration Of Conformity; Instruction Manual; General Power Tool Safety Warnings - Makita GA7020R Bedienungsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model
Depressed center wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n) / No load speed (n
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of the same
voltage as indicated on the nameplate, and can only be operated
on single-phase AC supply. They are double-insulated and can,
therefore, also be used from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model GA7020R
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA7030R
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA7040R
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA9020R, GA9040R
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
)
0
) : 90 dB (A)
pA
) : 101 dB (A)
WA
2
) : 8.0 m/s
h,AG
2
2
) : 3.0 m/s
h,DS
2
2
) : 6.5 m/s
h,AG
2
2
) : 3.5 m/s
h,DS
2
2
) : 7.0 m/s
h,AG
2
2
) : 3.0 m/s
h,DS
2
2
) : 6.0 m/s
h,AG
2
GA7020R GA7030R GA7040R GA9020R GA9030R GA9040R
180 mm
-1
8,500 (min )
473 mm 503 mm
5.6 kg 6.3 kg
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model GA9030R
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
NOTE: The declared vibration emission value is used for main
applications of the power tool. However if the power tool is used for
other applications, the vibration emission value may be different.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to pro-
tect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
5 ENGLISH
230 mm
6.5 mm
M14
6,600 (min
473 mm
6.6 kg 5.8 kg 6.5 kg
/II
2
) : 2.5 m/s or less
h,DS
2
2
) : 5.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
-1
)
503 mm
6.9 kg