Audio Playback; Hands-Free Function - Hama Voice Sport Bedienungsanleitung

Note
• If the connection could not be set up, first
switch off the earphones and then repeat the
steps for the Bluetooth
under 5.1.
• It may be necessary to change the settings
on your terminal device to enable it to
automatically connect to the earphones.
Note – Connection impaired
After the headset and terminal device have been
paired, a connection is established automatically.
If the Bluetooth connection is not established
®
automatically, check the following:
• Check the Bluetooth
device to see whether Hama BTH VOICE
SPORT is connected. If not, repeat the steps
listed under 5.1. Bluetooth
• Check whether obstacles are impairing the
range. If so, move the devices closer together.
• The performance can also be affected by a
weak battery.

5.3. Audio playback

Note
• Note that the functions described under 5.3.,
5.4. and 5.5. are only possible with an active
Bluetooth connection.
®
• Your terminal device must also support the
individual functions.
• For more information, please refer to the
operating instructions of your terminal device.
• Functions can still be controlled directly via the
terminal device.
• Set the volume on your terminal device to a
low level.
• Switch on the earphones with the MFB button (4).
• Start audio playback on the connected terminal
device.
• Press and briefly hold Volume + (5) to increase
the volume.
• Press and briefly hold Volume - (6) to reduce
the volume.
• Briefly press the MFB button (4) to start or pause
audio playback.
• Briefly press Volume + (5) to skip to the next
track.
• Briefly press Volume - (6) to skip back to the
previous track.
4
connection listed
®
settings of your terminal
®
pairing.
®
Note
An acoustic signal is given when the minimum or
maximum volume is reached.

5.4. Hands-free function

• Press the MFB button (4) once to answer an
incoming call.
• Press and hold the MFB button (4) for 2 seconds
or use your telephone to reject an incoming call.
• During a call, press the MFB button (4) once to
end the call.
• Press and hold Volume + (5) to increase the
volume.
• Press and hold Volume - (6) to reduce the
volume.
• Press the MFB button (4) twice to redial the
number last dialled.
Note
• Not all terminal devices support all the
functions specified above. For more
information, please also refer to the operating
instructions of your terminal device.
• Some functions and acoustic signals are
dependent on your terminal device.
Note – Call quality
To increase the call quality, please make sure that
you are near your mobile phone during the call.
5.5. Voice Assistant function
The Voice Assistant is an integrated, interactive
function that enables you to start communication
with your Siri or Google Assistant at the press of a
button. This function enables you to ask questions
and get various forms of help from your voice
assistant, even if you are not holding your telephone
in your hands.
Below you will find some examples selected from the
large number of possibilities.
Note – Siri
Siri is only available on suitable terminal devices
with iOS 5 or higher (from iPhone 4s onwards).
Note – Google Assistant
• The Google Assistant is only available on
suitable terminal devices with Android 5.0
or higher, Google Play Services, > 1.5 GB of
free memory and a minimum screen resolution
of 720P.