3-Control Panel; "Power" Button; Programme Selector - Haier HW80-B14979 Gebrauchsanleitung

3-Control panel

3-1
4

1 "Power" button

2 Programme selector

Note : Acoustic signal
In following cases, an acoustic signal is no sounds by default:
when pressing a button
when turning the programmes selector
The acoustic signal can be selected if necessary ; see DAILY USE(see P17 6.13).
3-2
3-3
3-4
Delay
Stain removal Steam
8
Stain removal
525 DRUM REFRESH
Display
3
4 Detergent /Softener drawer
3.1 "Power" button
Touch this button (Fig. 3-2) gently to switch on, the
display is shining, the indicator of the "Start/Pause"
button is flashing. Press it again for about 2 seconds
to switch
activated after a while machine will shut down auto-
matically.
3.2 Programme selector
By turning the knob (Fig. 3-3) one of 14 programmes
can be selected, related LED will light up, its default
settings will be displayed.
3.3 Display
The display (Fig. 3-4) shows following information:
Temp.
Extra Rinse Speed
5
Temp.
Steam Extra Rinse Speed
3
at the end of programme
Washing time
End time delay
Error codes and service information
Function buttons and "Start/Pause" button
6
2
Function buttons
5
6 "Start/Pause" button
EN
1