Mixtrax Settings - Pioneer MVH-S510BT Bedienungsanleitung

Menu Item
BRIGHTNESS
[KEY], [DISP]
PHONE COLOUR
[FLASHING]
[FLASH FX1] to [FLASH FX6]
[OFF]
ILLUMI FX
[ON], [OFF]

MIXTRAX settings

Menu Item
SHORT PLAYBCK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN], [OFF]
FLASH AREA
[KEY/DISPLAY], [KEY], [OFF]
Description
Select the brightness for the keys/display of the
unit from [1] to [10].
The available setting ranges differ depending on
[DIM SETTING].
Select the key colour when a call is received.
Applies the colour set by [KEY COLOUR].
• The illumination effect differs depending on
the selection of [ON] or [OFF] in [ILLUMI FX].
Cycle through a variety of colours automatically.
No change in key colour made.
The illumination effect can be seen when:
– there is an incoming call when [FLASHING] is
selected in [PHONE COLOUR]
– you are on a phone call
– the message received on the device is being
read when a Pioneer Smart Sync connection is
made
– the front panel is attached.
The illumination effect will activate when the
ACC power is turned on/off regardless of this
setting.
Description
Select the length of the playback time.
Select the area for the illumination effect.
When [OFF] is selected, the colour set under
the ILLUMINATION settings (page 29) is used as
the display colour.
- 30 -