App Control - Pioneer MVH-S510BT Bedienungsanleitung

Menu Item
BT MEM CLEAR
[YES], [NO]

APP CONTROL

[WIRED], [BLUETOOTH]
USB MTP
[ON], [OFF]
AUTO APP CONN
[ON], [OFF]
USB AUTO
[ON], [OFF]
* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once
the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may
continue to draw power from the battery if your vehicle's ignition does not have an ACC (accessory)
position.
Information on the connections for each device
The available sources differ depending on the setting value.
Please set [APP CONTROL] according to the table for the source you want to use.
For details on Pioneer Smart Sync connection, see page 17.
Description
Clear the Bluetooth device data (device list, PIN
code, call history, phone book, preset phone
numbers) stored in the unit.
[CLEARED] appears when data is successfully
deleted.
Select the appropriate connection method
according to your device.
See page 28 for details on the connections for
each device.
Set to [ON] when using the MTP connection.
The following sources are not available when the
setting is set to [ON].
• APP, SPOTIFY, iPhone, and USB (AOA)
Select [ON] to automatically launch Pioneer
Smart Sync when the iPhone/Android device is
connected to the unit.
Select [ON] to automatically switch to USB
source when a USB device/iPhone is connected
to the unit.
Select [OFF] when a USB device/iPhone is being
connected to the unit just for charging.
- 28 -