Options; Before First Use - ZANKER KDV10000FA Benutzerinformation

Options

Activate the Multitab option before you set a pro-
gramme. You cannot activate the option while a
programme operates.
Multitab
Activate this option only when you use the combi deter-
gent tablets.
This option deactivates the flow of rinse aid and salt.
The related indicators stay off.
The programme duration can increase.
How to activate the Multitab option
1.
Press and hold, at the same time, button
and button until the Multitab indicator comes
on.
If you stop to use the combi detergent tablets,
before you start to use separately detergent, rinse
aid and dishwasher salt, do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the rinse aid
dispenser are full.
3. Start the shortest programme with a rinsing phase,
without detergent and without dishes.
4. Adjust the water softener to the water hardness in
your area.
5. Adjust the released quantity of rinse aid.
Acoustic signals
The acoustic signals operate when the appliance has a
malfunction, when the adjustment of the level of the
water softener occurs and when the programme is
completed.
By default, the acoustic signals are on, but it is possi-
ble to deactivate them.

Before first use

1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If not,
adjust the water softener. Contact your local water
authority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
How to deactivate the acoustic signals
1. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode,
refer to "Setting and starting a programme".
2. Press and hold, at the same time, button
button until the indicators of buttons
and start to flash.
3.
Press button
• The indicators of buttons
off.
•
The indicator of button
• The indicator
4.
Press button
the acoustic signals are deactivated.
5. Deactivate the appliance to confirm the setting.
How to activate the acoustic signals
1. Refer to 'How to deactivate the acoustic signals',
step (1) through (3).
2.
Press button
• The indicators of buttons
off.
•
The indicator of button
• The indicator
3.
Press button
the acoustic signals are active.
4. Deactivate the appliance to confirm the setting.
4. Open the water tap.
5. Processing residues can stay in the appliance.
Start a programme to remove them. Do not use
detergent and do not load the baskets.
.
and
continues to flash.
comes on.
. The indicator goes off,
,
and
continues to flash.
is off.
. The indicator comes on,
and
,
go
go
19