Samsung HW-M4500 Benutzerhandbuch Seite 27


Up/Down/
Bluetooth
Surround
POWER
Left/Right
SOUND
MODE
VOL WOOFER

Bluetooth
POWER
Bluetooth
POWER
SOUND
MODE
VOL WOOFER
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select
the previous music file.
• Anynet+ / Auto Power Link
You can turn Anynet+ and Auto Power Link on or off.
Anynet+ and Auto Power Link are controlled by the Right and Left buttons
respectively.
– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,
you can control your Soundbar with a Samsung TV remote control.
Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
– Auto Power Link : If the Soundbar is connected to your TV through a digital
optical cable, the Soundbar can automatically turn on when you turn on your TV.
Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and
OFF.
– Anynet+ / Auto Power Link are set to ON by default.
Press to turn the Bluetooth POWER function on and off.
When the Bluetooth POWER function is on, "ON - BLUETOOTH POWER" appears in the
Soundbar's display.
• Bluetooth POWER function : If the Soundbar is in standby mode and the Bluetooth
POWER function is On, when you turn on a previously connected Bluetooth device,
the Soundbar automatically turns on and connects via Bluetooth to the device.
• If you press the Bluetooth POWER button again to turn off the BT function,
"OFF-BLUETOOTH POWER" appears in the Soundbar's display.
• If the "D.IN" mode is on and the Soundbar is connected to a Samsung smart TV
released in 2017 or later, the Soundbar can be controlled with the TV remote control.
In this mode, you cannot turn off Bluetooth POWER.
ENG - 23