Weather Forecast; Backlight - Hama Color EWS-1400 Bedienungsanleitung

Note – Weekday
You can choose from German (GE), English (EN), Danish (DA),
Dutch (DU), Italian (IT), Spanish (SP) and French (FR) for the
weekday display.
Celsius/Fahrenheit
• Press the – button (19) to switch between °C and °F for the
temperature display.
Alarm
• Press the ALARM button (20) to display the alarm time.
• Press and hold the ALARM button (20) for approx. 3 seconds
to set the time of the alarm displayed. The hours display begins
to ash.
• Press the + button (18) or the – button (19) to select the hour
for the alarm time and con rm your selection by pressing the
ALARM button (20). The minutes display begins to ash.
• Repeat the process to set the minutes for the alarm time.
• If no entry is made for 15 seconds, setup mode automatically
exits.
• Press the ALARM button (20) repeatedly to activate or
deactivate the daily alarm. The alarm symbol (10) will appear or
disappear accordingly.
• If the alarm is triggered, the alarm symbol (10) will begin to ash
and an alarm will sound.
• Press any button except SNOOZE / LIGHT (22) to stop the
alarm. Otherwise, it will stop automatically after 2 minutes.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE/LIGHT
button (22) to activate the snooze function. Zz begins to ash
on the display. The alarm signal will be stopped for 5 minutes,
after which it will sound again.
• Press any button (except the SNOOZE/LIGHT button (22)) to
stop the snooze function and the alarm.

6.3. Weather forecast

• Based on changes in the atmospheric pressure and the data
saved, the base station is able to make weather forecasts for the
next 12 to 24 hours.
Note – Weather forecast
The weather forecast function is not available during the rst
few hours of operation because it requires data that is collected
during operation.
The weather forecast and the current weather are indicated by ve
different symbols (3):
Symbol (3)
• The weather station indicates a trend as to how the values for
the outdoor humidity (15), room humidity (7) and atmospheric
pressure (4) are likely to develop over the next few hours.
Display
6.4. Maximum and minimum temperature and humidity
values
• The base station automatically stores the maximum and
minimum outdoor/indoor temperature and humidity values.
• Repeatedly press the + button (18) to switch between the
current temperature and humidity, minimum temperature and
humidity (MIN) and maximum temperature and humidity (MAX).
• Press and hold the + button (18) for approx. 3 seconds to reset
the stored maximum and minimum values.

6.5. Backlight

• Press the SNOOZE/LIGHT button (22) to light up the display for
approx. 5 seconds.
• Press the SNOOZE/LIGHT button (22) again to light up the
display steadily.
Weather
Sunny
Slightly cloudy
Cloudy
Rainy
Stormy
Trend
Increasing
Constant
Decreasing
5