Makita 8270D Betriebsanleitung Seite 7

ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Tungsten-carbide tipped hammer bit
• Phillips bit
• Slotted bit
• Socket bit
• Blow-out bulb
• Safety goggles
• Various type of Makita genuine batteries and chargers
• Rubber pad assembly
• Wool bonnet
• Foam polishing pad
• Plastic carrying case
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
For Model 8270D
Sound pressure level (
Sound power level (L
Uncertainty (K): 3 dB (A)
For Model 8280D
Sound pressure level (
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
For Model 8390D
Sound pressure level (
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-1:
For Model 8270D
Work mode: impact drilling into concrete
Vibration emission (
Uncertainty (K): 1.5 m/s
Work mode: drilling into metal
Vibration emission (
Uncertainty (K): 1.5 m/s
For Model 8280D
Work mode: impact drilling into concrete
Vibration emission (
Uncertainty (K): 1.5 m/s
Work mode: drilling into metal
Vibration emission (
Uncertainty (K): 1.5 m/s
All manuals and user guides at all-guides.com
ENG102-2
L ): 81 dB (A)
pA
): 92 dB (A)
WA
ENG104-1
): 80 dB (A)
L
pA
ENG104-1
): 80 dB (A)
L
pA
ENG203-1
2
a ): 10 m/s
h, ID
2
ENG302-2
2
): 2.5 m/s or less
a
h, D
2
ENG203-1
2
): 9 m/s
a
h, ID
2
ENG302-2
2
or less
a ): 2.5 m/s
h, D
2
For Model 8390D
Work mode: impact drilling into concrete
Vibration emission (
Uncertainty (K): 1.5 m/s
Work mode: drilling into metal
Vibration emission (
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Cordless Percussion-Driver Drill
Model No./ Type: 8270D,8280D,8390D
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
ENG203-1
2
): 7.5 m/s
a
h, ID
2
ENG302-2
2
or less
): 2.5 m/s
a
h, D
2
ENG901-1
ENH101-12
as the responsible
7