Samsung SCC-B2305 Bedienungsanleitung Seite 18

(AWB/MANU)
E
PRESET 3200K
RET
SYNC
The INT mode is necessary for using the internal synchronization and
the LINE... mode is necessary for the operation of multi cameras
because it synchronizes the camera phase by using the external
signal(AC Signal). A little phase deviation for some sets may be aligned
by adjusting the PHASE. The SYNC function is available only with AC
power source. Put the cursor on the SYNC, press the LEFT/RIGHT key
to select the LINE... item, and press the [ENTER] key. Now, you will see
the submenu to adjust the PHASE. The PHASE ranges from -106H to
+106H(NTSC), -138H to +138H(PAL).
CAMERA ID ON...
IRIS DC...
BLC/WDR OFF
COLOR/BW EXT...
SHUTTER OFF
AGC OFF
WHITE BAL MANU...
SYNC LINE...
SPECIAL ...
EXIT QUIT
When you use DC power source, the SYNC Menu is full --- and you can
not use the SYNC function.
34
All manuals and user guides at all-guides.com
(AWB/MANU)
press the
[Left/Right]
PRESET OFF (USER)..
key
RED ( 00) - - - - I - - - -
BLUE ( 00) - - - - I - - - -
RET
(LINE LOCK)
press the
[ENTER] key
PHASE (-106) I - - - - - - - -
RET
SPECIAL
You can control the BAUD RATE, REVERSE, POSI/NEGA, DETAIL, and
MOTION DET function by yourself in the SPECIAL menu. If your select the
SPECIAL menu and press the [ENTER] key, the SPECIAL submenu screen
will appear.
CAMERA ID ON...
IRIS DC...
BLC/WDR OFF
COLOR/BW EXT...
SHUTTER OFF
AGC OFF
press the
WHITE BAL MANU...
[ENTER] key
SYNC INT
SPECIAL ...
EXIT QUIT
❿ BAUD RATE : Sets the communication speed to 4800, 9600, 19200, or
38400bps for RS-232 communication.
❿ REVERSE : REVERSES THE SCREEN IN 3 MODES, LEFT/RIGHT,
UP/DOWN, OR LEFT/RIGHT/UP/DOWN.
Note: Please reset the BLC, MOTION, PRIVACY area because they don't change
by all means.
❿ POSI/NEGA : Outputs the video brightness signal normally or reversely.
The brightness level is high at inverted output.
❿ DETAIL : Adjusts the horizontal and vertical sharpness.
❿ MOTION DET : MOTION DET detects any movement of objects. if you
activate the MOTION DET function at the time when you expect nobody
to move, the function will detect the movement of an intruder Once
detected, the function outputs the ALARM signal. The MOTION DET
function detects any movement and selects the movement sensitivity
and the area to detect the movement. If you select the ON... mode and
press the [ENTER] key, the MOTION DET submenu screen will appear.
E
(SPECIAL)
BAUD RATE 38400
REVERSE OFF
POSI/NEGA +
DETAIL (0)----I--
MOTION DET OFF
PRIVACY ...
RET
35