Samsung SCC-B2305 Bedienungsanleitung Seite 12

IRIS
E
This CAMERA has an IRIS function for automatic control of the brightness
level through the intensity of radiation. The ALC can select the DC IRIS
level, VIDEO IRIS, and ELC LEVEL.
❿ DC...
If you select the DC menu and press the [ENTER] key, the sub-screen
will appear to set the brightness level. Here, you are able to set the
brightness level by pressing the LEFT or RIGHT key in the LEVEL
menu. Level setting is available only by using the DC IRIS lens.
Then, you shall puts the ALC LENS selection switch on the side of the
camera in the "DC" position.
CAMERA ID ON...
IRIS DC...
BLC/WDR OFF
COLOR/BW COLOR
SHUTTER OFF
AGC OFF
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
22
All manuals and user guides at all-guides.com
(IRIS/DC)
press the
[ENTER] key
LEVEL (0) ----I----
RET
❿ VIDEO
It is used while the VIDEO lens is in use. You shall use the variable
resistor attached to the IRIS LEVEL LENS for the control. Then put the
ALC LENS selection switch on the camera side in "VIDEO" position.
CAMERA ID
IRIS
BLC/WDR
COLOR/BW
SHUTTER
AGC
WHITE BAL
SYNC
SPECIAL
EXIT
❿ ELC...
This menu controls the High Speed Shutter Level within a limited range
in the event of too intensive radiation from outside while using the
Manual Lens. If you select the ELC in the IRIS menu and press the
[ENTER] key, the following subscreen will appear. Here, you are able to
set the level by pressing the LEFT or RIGHT key.
CAMERA ID ON...
IRIS ELC...
BLC/WDR OFF
COLOR/BW COLOR
SHUTTER OFF
press the
AGC OFF
[ENTER] key
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
OFF
VIDEO
OFF
COLOR
OFF
OFF
ATW
INT
...
QUIT
(IRIS/ELC)
LEVEL (0) ----I----
RET
23
E