Detaching The Worktop - AEG S71709TSW0 Benutzerinformation

30 www.aeg.com
9.4 Installing under a continuous worktop
200 cm
93-103 mm

9.5 Detaching the worktop

A
2
105 mm
570 mm
550 mm
500/550/600 mm
1
2
If your refrigerator is installed under a
continuous worktop, an air outlet open-
ing of at least 200cm
grille matching the worktop design
should be installed at the rear of the
worktop.
The cut surfaces of the worktop should
be varnished to avoid swelling due to
penetration of moisture.
The appliance wall distance must be at
min. 820 mm
least 30 mm and should be checked be-
fore the ventilation grille is inserted.
To remove the worktop, please proceed
as follows:
• Unscrew the left and the right screws
at the back.
• Push the worktop backwards and lift it
up.
• Store the screws in a safe place to-
gether with the worktop.
3
2
and a ventilation