Detaching The Worktop - AEG S41600TSW1 Benutzerhandbuch

9.4 Installing under a continuous worktop
200 cm
2
93-103 mm

9.5 Detaching the worktop

2
A
105 mm
570 mm
550 mm
min. 820 mm
500/550/600 mm
1
3
If your refrigerator is installed under a
continuous worktop, an air outlet open-
ing of at least 200cm
grille matching the worktop design
should be installed at the rear of the
worktop.
The cut surfaces of the worktop should
be varnished to avoid swelling due to
penetration of moisture.
The appliance wall distance must be at
least 30 mm and should be checked be-
fore the ventilation grille is inserted.
To remove the worktop, please proceed
as follows:
• Unscrew left and right screws at the
back.
• Lift the worktop slightly at the front,
push back about 20 mm and lift off
from the front.
• Unscrew left and right screws at the
front.
• Store the screws in a safe place to-
gether with the worktop.
ENGLISH
13
2
and a ventilation