Controls And Functions - Eizo DuraVision FDX1501-A Installationshandbuch

Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact
your local EIZO representative.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Analog signal cable : MD-C87
• Stereo mini jack cable
Attention
• This product does not include a power cord. Please provide separately a power cord which meets the usage
requirements. For more information, please contact your local EIZO representative.

Controls and Functions

*1
Setting menu
1 2 3 4
1. button
2. button
3. button
4. button
5. button
6. button
7. Power indicator
8. Speaker
9. Main power switch
10. Power connector
11. Input signal connector
12. USB upstream port
(for FDX1501T-A only)
13. RS-232C port
(for FDX1501T-A only)
14. Stereo mini jack
15. Stand
16. Screw holes for securing
the clamper (2)
*1 For instructions for use, refer to the User's Manual on the CD-ROM.
*2 These ports cannot be used at the same time. When cables are connected to both ports, the USB port is
prioritized.
5 6 7
Displays the volume adjustment menu. (Press
Switches input signals for display.
Changes Color Mode.
Displays the Setting menu, determines an item on the menu screen, and saves
adjusted values.
• Provides the menu selection as well as the adjustment and setting of a function.
• Displays the Brightness menu.
Turns the power on or off.
Indicates the monitor's operation status.
Blue : Operating Orange : Power saving mode
Outputs audio source.
Turns the main power on or off.
Connects the power cord.
Left : DVI-D connector / Right : D-Sub mini 15-pin connector
Connects a PC and monitor via a USB cable when this product is used as a touch
*2
panel monitor.
Connects a PC and monitor via a RS-232C cable when this product is used as a
*2
touch panel monitor.
Connects the stereo mini jack cable.
Used to adjust the angle of the monitor screen.
Attach the clamper to prevent the cable from falling off. Fit the cable in the clamper
and fit it with the set screw (M4 × 14), as shown in the diagram above.
• USB cable: MD-C93 (for FDX1501T-A only)
• EIZO LCD Utility Disk (CD-ROM)
• Setup Manual (this manual)
• Clamper : 2 pcs.
• Screws for fixing the clamper M4 × 14 : 2 pcs.
(Prepare a screwdriver.)
8 9 10 11 12 13
or
OFF: Main power/Power off
Attaching the clamper
・FDX1501-A
15
・FDX1501T-A
16
14 8
to adjust volume.)
7