Inhaltsverzeichnis
Werbung
TENSOR SERIES PORTABLE PA
REAR PANEL CONTINUED
7. MAINS INLET SOCKET AND FUSE: IEC input
for connection of an appropriate mains lead. Only replace
the fuse with the type indicated on the rear panel.
8. MAINS SWITCH: Turns the system on and off.
Ensure the Volume control
switching on and off.
9. VOLTAGE SELECT SWITCH: Although every
effort has been made to select the correct voltage for
the region of use. Please check the voltage setting is
correct before powering up for the first time. Damage
could occur if the voltage is incorrectly set.
10. INFORMATION: Area relating to the amplifier:
Serial Number, operational information, power rating,
etc.
11. AIR VENTS: These are critical for the longevity
and reliability of the amplifier - DO NOT BLOCK. The
same applies to the vents at the top of the control
panel.
FUSE REPLACEMENT
SWITCH OFF AND DISCONNECT THE POWER CORD BEFORE PROCEEDING!
POWER
© 2021 HH Electronics Ltd
is set to
minimum when
FUSE REPLACEMENT
1. Slide out the fuse holder tray.
2. Only replace fuse with the same
type and power rating as specified
on the rear panel.
Designed and Engineered in the UK by HH Electronics LTD.
DESIGNED AND ENGINEERED IN THE UK
7
10
MODEL: TRE-1201
WWW.HHELECTRONICS.COM
8
EN
LIVE SOUND
9
11
7
Werbung
Inhaltsverzeichnis
