Fuel Requirement - nemaxx P6 Originalbetriebsanleitung

1. FUEL REQUIREMENT

Pellets are made from wooden waste, from sawmills and planning workshops, as well as from
residue from forestry operations.
These "starting products" are crushed, dried, and pressed into Pellet "Fuel" without any bonding
agent.
SPECIFICATIONS FOR HIGH QUALITY PELLETS
Calorific Value: 5.3 kWh/kg
Density: 700 kg/m3
Water Content: Max. 8% of the weight
Ash proportion: Max. 1% of the weight Diameter: 5 - 6.5mm
Length: Max. 30mm
Contents: 100% wood untreated and without any bonding agents added
(bark proportion max. 5%)
Packaging: In sacks, made of environmentally neutral or biologically degradable plastic,
or from paper (2-3 layers / similar to cement packaging)
Please ask your pellet stove dealer for tested fuel and a list of monitored fuel
manufacturers.
Using poor quality or prohibited pellet fuel will have a negative effect on the function
of your pellet stove and can also lead to the warranty becoming null and void, as well
as the product liability connected with this.
Observe waste incineration legislation.
Burn only pellets that have been tested.
PELLET STORAGE
In order to guarantee problem free burning of the wooden pellets, it is necessary to store the fuel as
dry as possible and free from impurities.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety:
Children should be supervised to ensure that they do not play with the appliance.
EN
3
Version: 10
25.10.2021