Transport; Attaching Transport Ropes For Transport By Crane; Securing The Product On A Lorry - DENIOS. GF-Serie Betriebsanleitung

4

Transport

4.1

Attaching transport ropes for transport by crane

The product has a transport fitting at each corner.
Only trained slingers may carry out the following work.
WARNING
Impact from falling load.
Falling loads can cause severe injuries or death.
Only use approved transport ropes with sufficient load capacity.
g
Distribute the load evenly between all transport ropes.
g
Attach the transport ropes to the product with a minimum angle of 60°.
g
Do not lift the product over persons or objects.
g
Ü
How to secure the transport ropes
4.2

Securing the product on a lorry

If you need to transport the product on public roads, the product must be loaded onto a lorry and secured. The legal re-
quirements for securing loads must be observed.
NOTICE
Non-approved transport will lead to a fine.
Fines are imposed if the permitted dimensions for road transport are exceeded.
Ensure you observe the traffic regulations.
g
In addition, tie down the side next to the driver's cab and the opposite side as follows:
163035_GF_005_INT
Attaching transport ropes for transport by crane
Doors are locked and secured with transport safety device if
ü
needed.
There are sufficient transport ropes available. There are the
ü
same number of transport ropes as there are transport fit-
tings on the product.
1. Secure transport ropes to all transport fittings.
The product may be lifted.
þ
Transport
41 / 96