Design And Function; Description; Scope Of Delivery; Weather Station, Model Cpu6000-W - WIKA CalibratorUnit CPU6000-Serie Betriebsanleitung

4. Design and function

4. Design and function
4.1

Description

The CPU6000 series is made up of three instruments:
EN

Weather station, model CPU6000-W

■
Pressure balance sensor box, model CPU6000-S
■
Digital multimeter, model CPU6000-M
■
All products are used for measured value recording of data relevant for calibration
certificates.
This calibration concept simplifies the generation of certificates and increases the
productivity and quality of the certificate generation process.
In combination with any pressure balance, the CPB-CAL (iPad
(PC software) can determine the necessary mass loads or the reference pressure.
Through simple operation and setting, the calculation of the mass loads or the pressure is
made easier. The CalibratorUnit takes into account all critical influencing factors and thus
increases the accuracy of the measurement.
A calibration of relative pressure measuring instruments with absolute pressure
references, and vice versa, is also possible. Via the integrated voltage supply and
multimeter function, easy calibrations of pressure transmitters can be carried out.
The weather station and the digital multimeter can also be used, independently of the
pressure balance calibration, with other calibration instruments and the WIKA-CAL
software. Existing automatic calibration systems can thus be enhanced. Via the integrated
voltage supply and multimeter function, easy calibrations of pressure transmitters can be
carried out.
4.2

Scope of delivery

Model CPU6000-W, model CPU6000-S or model CPU6000-M
■
AC adapter, DC 24 V, 625 mA
■
Factory calibration certificate
■
Operating instructions in German and English language
■
Cross-check scope of delivery with delivery note.
22 WIKA operating instructions CalibratorUnit, CPU6000 series
®
app) and/or WIKA-CAL