Troubleshooting - TFA 98.1071 Solar Bedienungsanleitung

TFA_No. 98.1071_Anleit_02_13
SOLAR - Radio-controlled alarm clock
7. Operation
• The instrument will quit the setting mode, if there is no but-
ton used within 15 seconds.
7.1 Manual setting of the clock and calendar
• Hold "MODE" button for 3 seconds to enter setting mode. The
hour indicator is flashing
• Press "▲ (12/24)" or "▼ ( )" to adjust the setting and press
"MODE" button to confirm each setting.
• The setting sequence is shown as follow:
• Hours, minutes, seconds, year, month / day sequence, month,
day, time zone, day-of-week language.
• In "month/day sequence" the two different date displays can
be selected: month / date (American version) or date / month
(European version).
• The time zone is used for the countries where the DCF signal
can be received but the time zone is different from the Ger-
man time (e.g. + 1=one hour later).
• Day-of-week language: German (GE), English (GB), Spanish
(ES), Italian (IT), French (FR).
7.2 12 or 24 hours mode
• Press "▲ (12/24)" button to select 12 or 24 hours mode.
• In 12 HR system AM or PM appears on the display.
7.3 Setting the alarm
• Press "MODE" button. The alarm time ("AL ") is shown on the
LCD.
• When viewing the alarm time, hold "MODE" button for 3
seconds to enter alarm time setting. The hour digits are flash-
ing. Press "▲ (12/24)" button or "▼ ( )" button to adjust the
hours. Confirm with "MODE" button. Set minutes in the same
way.
• Press "AL ON/OFF" button to switch alarm on or off. If it is on,
" " is shown on the LCD.
• When alarming, press any button to stop the alarm.
• Press "SNOOZE " button when alarming to activate the snooze
function. "Zz" icon will flash. The alarm will stop for 5
minutes, then it turns on again.
14
14.02.2013 10:29 Uhr Seite 8
SOLAR - Radio-controlled alarm clock
7.4 Temperature display
• Press "▼ ( )" button to change between °C or °F as tempera-
ture unit.
8. Care and maintenance
• For a very good function keep the solar panel always clean.
Clean it with a soft cloth and maybe a little glass- or display
cleaner. Do not use solvents or scouring agents.
• Protect it from moisture.

9. Troubleshooting

Problem Solution
➜ Make sure that no objects cover
No display /
incorrect display
➜ Recommended incidence of light:
➜ Push the "POWER ON/OFF" slide
➜ Hold the "▼( )" button for
No DCF reception
➜ Wait for attempted reception
➜ Choose another place for the
➜ Check if there is any source of
➜ Restart the device according to
➜ Set the clock manually
If your device fails to work despite these measures contact the
supplier from whom you purchased it.
10. Waste disposal
This product has been manufactured using high-grade mate-
rials and components which can be recycled and reused.
This instrument is labelled in accordance with the EU
Waste Electrical and Electronic Equipment Directive
(WEEE).
the solar panel.
At least 4 hours per day
switch off and on to reset the unit
3 seconds
during the night
instrument
interference
the manual
15