Herunterladen Diese Seite drucken

Troubleshooting - TFA SONIO 2.0 Bedienungsanleitung

Funkwecker mit temperatur

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
TFA_No. 60.2559_Anleitung
SONIO 2.0 – Radio-controlled alarm clock with thermometer
• If the alarm is not stopped manually, the alarm tone automatically turns off
after two minutes and will be reactivated at the same set time in the following
day.
• You can activate the snooze function by pressing the LIGHT/SNOOZE button on
the top.
• The snooze symbol will be flashing and the alarm will be interrupted for
5 minutes.
• The snooze function can be activated up to 10 times.
8. Light
• Press the LIGHT/SNOOZE button. The backlight turns on for 6 seconds.
8.1 Night light
• As soon as the batteries are installed the night light for the display is activat-
ed
appears on the display.
• A weak backlight turns on automatically as soon as the light sensor registers
darkness.
• Press the + button for 3 seconds to deactivate the function.
disappears.
9. Care and maintenance
• Clean the instrument with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the batteries if the device will not be used for an extended period of
time.
• Store the device in a dry place.
22
01.07.2020
12:24 Uhr
Seite 12
SONIO 2.0 – Radio-controlled alarm clock with thermometer
9.1 Battery replacement
• Change the batteries when the display starts to fade or the alarm tone
declines.
• Open the battery compartment at the bottom of the instrument and insert two
new batteries 1,5 V AA. Make sure the polarities are correct. Close the battery
compartment again.
10. Trouble shooting
Problem
Solution
➜ Ensure the batteries' polarities are correct
No display
➜ Change the batteries
➜ Activate DCF reception in setting mode
Symbol
is missing
(No DCF reception)
(DCF ON)
➜ Press and hold the – button for 3 seconds and
start the initialisation manually
➜ Wait for an attempt reception during the night
➜ Choose another place for your product
➜ Set the clock manually
➜ Check if there is any source of interference
➜ Restart the instrument according to the manual
➜ Change the batteries
Incorrect indication
If your device fails to work despite these measures, contact the retailer where
you purchased the product.
23

Werbung

loading

Diese Anleitung auch für:

60.2559.54