Getting Started; Button Function - Rollei 11s Plus Anleitung

Waterproof Case
10
– Insert Camera into Waterproof Case
1. Ensure the case is clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. The camera can be mounted using the accessories provided.
Battery
Before using the device for the first time, you must fully charge the battery.
– Charging the Battery
1. Connect the camera to a computer or USB power supply (DC 5 V
2. The charging status light turns on while the battery is charging.
3. The charging status light turns off when the battery is fully charged.
– Changing the Battery
1. Hold the camera so that you can see the camera display and slide the
battery cover to the right to open the battery compartment.
2. Remove the battery.
3. lnsert the new battery so the contacts line up with those of the camera.
Note: Operation is also possible while charging (e. g. via a power bank).

Getting Started

– Turn On: Press and hold the Power / WiFi Button for 3 seconds. When the
camera is turned on, the
Operation Indicator turns on.
– Turn Off: Press and hold the Power / WiFi Button for 3 seconds.
Modes of the Camera
The Rollei 11s Plus offers various photo and video modes. In the following we give
you a short explanation of how they work. On the following pages you can find
detailed descriptions how to change the settings for each mode.
– "Normal" video mode: You can record a single video with normal speed.
– "Seamless" video mode: Here you can record in a loop. The loop recording can
be set in an interval of 1 or 5
minutes. After this interval, a new recording is made and saved in each case. If
the memory card is full, the recordings made so far will be overwritten.
– "V-Timelapse" video mode: In timelapse video mode the camera takes pictu-
res every 0.5 seconds up to every minute and creates a video out of that. You can
choose the video length from 5 minutes up to 30 minutes or endless.
– "SlowMotion" video mode: The camera records a sequence and replays it in
slowmotion.
– "FastMotion" video mode: Here the camera replays the video faster than
recorded, from double time
up to 15 times faster. Compared to time-lapse video mode, these recordings are
a little slower.
– "Single" photo mode: You can take a single shot.
– "Burst" photo mode: This allows you to take 3 shots / 1s, 7 shots / 2s, 15 shots
/ 4s, 30 shots / 8s.
– "P-Timelapse" photo mode: In timelapse photo mode the camera takes
pictures every 0.5 seconds up to every minute for 5 to 30 minutes or unlimited.
– "CountDown" photo mode: You can set a timer on 2 or 10 seconds delay
– "LongExp" long exposure photo mode: It uses a long-duration shutter speed
to sharply capture the stationary elements of images.
– Date Stamp: You can add a watermark to your pictures or videos, either with
just the date or with date and time.
2 A).
ENGLISH
Touch Function
You can use the rear touch screen to access the functions of the camera.
– Swipe to the left or right to change between the video mode and
the photo mode.
In the video or photo mode you can access the playback mode via the symbol
in the left lower corner (1) and the settings with the symbol in the right lower
corner (3). To access the mode menu, touch the lower middle part (2).
1 2
3
– Swipe up to access the mode menu of video and photo.
– Swipe down to open shortcuts to lock and power off for quick
operations.
– To unlock touch the display and swipe from left to right, following
the arrows, or press the Shutter / Select Button.

Button Function

Overview Menu
To get access to the mode menu, press the Shutter / Select Button for 3
seconds. Cycle through the menu (see above) with the Mode Button, confirm
with the Shutter / Select Button.
1 2
3