Getting Started - Rollei 5s Plus Handbuch

Waterproof Case
4
• Insert Camera into Waterproof Case
1. Ensure the case is dry and clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. The camera can be mounted using the accessories provided.
Battery
Before using the device for the first time, you must fully charge the battery.
• Charging the Battery
1. Connect the camera to a computer or USB power supply (5V/2A).
2. The charging status light turns on while the battery is charging.
3. The charging status light turns off when the battery is fully charged.
• Changing the Battery
1. Hold the camera so that you can see the camera display and slide the battery cover to the
right to open the battery compartment.
2. Remove the battery.
3. lnsert the new battery so the contacts line up with those of the camera.

Getting Started

• Turn On: Press and hold the Power/Mode Button for 3 seconds.
When the camera is turned on, the Operation Indicator turns on.
• Turn Off: Press and hold the Power/Mode Button for 3 seconds.
ENGLISH