Herunterladen Inhalt Inhalt Diese Seite drucken

Care And Cleaning; General Information; Cleaning The Hob; Hints And Tips - Electrolux GK58TSITO Benutzerinformation

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Touch
mode.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After
that time the system
deactivates the fan
automatically and prevents
you from accidental
activation of the fan for the
next 30 seconds.
Operating the fan speed manually
You can also operate the function
manually. To do that, touch
hob is active. The symbol turns white.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually. When you press
, you raise the fan speed by one.

7. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.
• Always use cookware with a clean
base.
• Scratches or dark stains on the
surface have no effect on how the hob
operates.
• Use a special cleaner suitable for the
surface of the hob.
• Use a special scraper for the glass.

7.2 Cleaning the hob

• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,

8. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
to select an automatic
when the
When you reach an intensive level and
press
again, you set the fan speed to
0, which deactivates the hood fan. The
symbol turns red. To start the fan again
at the fan speed 1 touch
To activate the automatic
operation of the function,
deactivate the hob and
activate it again.
If the function is not active,
deactivates after 10
seconds. When the hob is
restarted,
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so, set the automatic mode to
H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the
glass surface at an acute angle and
move the blade on the surface.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and a non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
ENGLISH
17
.
lights up again.

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis