Technical Data - Rothenberger RODIA-VAC Bedienungsanleitung

• Never allow the pump to stand in water.
• The pump should stand on a dry horizontal surface when in operation and should be se-
cured to prevent possible movement.
• The vacuum will be maintained for a short time after failure of the electric supply or malfunc-
tion of the appliance. Should this occur, stop working immediately and check the pressure
gauges on the pump and vacuum base plate. Secure the workpieces to prevent falling.
• Do not modify the appliance or tamper with its parts.
• Use only genuine spare parts.
• Empty the water separator each time before transporting the pump.
• Ensure that the workplace is well lit.
• Check that the mains voltage is the same as the voltage rating stated in the CE plate.
• Learn how to stop the vacuum pump suddenly and how to use all controls.
• Before any intervention, empty the pressure tank and disconnect the power supply, to pre-
vent any sudden unexpected re-start of the appliance.
• After any maintenance operation, make sure all components have been fitted correctly.
• Keep children and animals away from the working area, so as to avoid any injury caused by
devices connected to the vacuum pump.
• Carefully read the instructions of any tool you have installed.
• Make sure that the temperature in the working area is between +5 and +45 °C.
• Always observe the existing maintenance program (see 4. in this manual).
• Do not touch the internal arranged components and pipes. These parts reach a very high
temperature during the operation and keep that for a certain time after switching off.
• Do not leave inflammable objects or nylon parts or cloths near the vacuum pump.
• Do not move the vacuum pump with the tank under pressure.
• Do not use the vacuum pump with the supply cord damaged or with precarious connection.
• Do not use the vacuum pump in a potential explosive environment (e.g. in the immediate vi-
cinity of gas tanks) or near open flames and never in moist or dusty premises.
• Do not allow anyone to operate the vacuum pump unless she/he has received correct in-
structions.
• Do not hit the fan wheels with metallic or sharp objects as they could break during operation.
• Do not operate the vacuum pump without air filter.
• Do not alter any manipulations to the safety and adjusting devices.
• Do not connect a hose which has a flow rate lower than that of the vacuum pump.
2

Technical Data

RODIA-VAC art. no.:
Vacuum ............................................. 85 % ..................................... 85 %
Suction volume .................................. 200 l/min ............................... 200 l/min
Motor speed range ............................. 2850 1/min ............................ 3520 1/min
Motor power....................................... 1,1 kW .................................. 1,1 kW
Voltage .............................................. 230 V / 50 Hz ........................ 110 V / 60 Hz
Pressure tank volume ........................ 10 l ....................................... 10 l
Vacuum pump ................................... oilfree ................................... oilfree
Weight ............................................... ca. 20 kg ............................... ca. 20 kg
Class of protection ............................. I ............................................. I
Protection type ................................... IP 22 ..................................... IP 22
Noise pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
The noise level have been measured in accordance with a standardized test.
12
FF35200
) ................. 77 dB (A) | K
pA
) ................... 88 dB (A) | K
WA
ENGLISH
FF35204
3 dB (A) ......... 77 dB (A) | K
pA
3 dB (A)......... 88 dB (A) | K
WA
3 dB (A)
pA
3 dB (A)
WA