Technical Data - Rothenberger RODIA-VAC Bedienungsanleitung

• Make sure that the temperature in the working area is between +5 and +45 °C.
• Always observe the existing maintenance program (see 4. in this manual).
• Do not touch the internal arranged components and pipes. These parts reach a very high
temperature during the operation and keep that for a certain time after switching off.
• Do not leave inflammable objects or nylon parts or cloths near the vacuum pump.
• Do not move the vacuum pump with the tank under pressure.
• Do not use the vacuum pump with the supply cord damaged or with precarious connection.
• Do not use the vacuum pump in a potential explosive environment (e.g. in the immediate vi-
cinity of gas tanks) or near open flames and never in moist or dusty premises.
• Do not allow anyone to operate the vacuum pump unless she/he has received correct in-
structions.
• Do not hit the fan wheels with metallic or sharp objects as they could break during operation.
• Do not operate the vacuum pump without air filter.
• Do not alter any manipulations to the safety and adjusting devices.
• Do not connect a hose which has a flow rate lower than that of the vacuum pump.
2

Technical Data

RODIA-VAC art. no.:
Vacuum ............................................. 85 % ..................................... 85 %
Suction volume .................................. 200 l/min ............................... 200 l/min
Motor speed range ............................. 2850 1/min ............................ 3520 1/min
Motor power....................................... 1,1 kW .................................. 1,1 kW
Voltage .............................................. 230 V / 50 Hz ........................ 110 V / 60 Hz
Pressure tank volume ........................ 10 l ....................................... 10 l
Vacuum pump ................................... oilfree ................................... oilfree
Weight ............................................... ca. 20 kg ............................... ca. 20 kg
Class of protection ............................. I ............................................. I
Protection type ................................... IP 22 ..................................... IP 22
Noise pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
The noise level have been measured in accordance with a standardized test.
Vibration total value .............................................................
The vibration level given in this information sheet has been measured in accordance with a
standardized test and may be used to compare one tool with another. It may be used for a pre-
liminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
12
FF35200
) ................. 77 dB (A) | K
pA
) ................... 88 dB (A) | K
WA
≤ 2,5 m/s
ENGLISH
FF35204
3 dB (A) ........ 77 dB (A) | K
pA
3 dB (A)......... 88 dB (A) | K
WA
2
¦ K= 1,5m/s² .............. ≤ 2,5 m/s² ¦ K= 1,5m/s²
3 dB (A)
pA
3 dB (A)
WA