Safety Notes; Intended Use; General Power Tool Safety Warnings - Rothenberger RODIA-VAC Bedienungsanleitung

1

Safety Notes

1.1

Intended use

The vacuum pump RODIA-VAC is to be used with ROTHENBERGER diamant-drilling systems
for suction on smooth surface. It is designed to be used as an air suction pump and is not to be
used for other gases and certainly not for liquids. It is equipped with a water separator in case of
use where the presence of water is essential (e.g. diamond core drilling).
This device may only be used correctly as described!
The vacuum pump has been designed and built for intermittent duty applications. It is equipped
with an overload cut-out which trips automatically and cuts off power when safety limits are
reached. However, we recommend that the vacuum pump duty cycle never exceed 50% and
continuous operation never exceed 15 minutes.
The vacuum pump may be connected to several accessories. For technical specifications and
detailed instructions, please see the instructions provided for each accessory equipment.
1.2

General Power Tool Safety Warnings

WARNING! Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious inju-
ry.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your electrically-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will in-
crease the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors only, use an extension cords suitable for out-
door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)
If operating a power tool in a damp location is unavoidable, use a residual current de-
vice (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, al-
cohol or medication. A momentary lack of attention while operating power tools may result
in serious personal injury.
10 ENGLISH