Technical Specification; Warranty; Warnings - Topdon BTMOBILE PROS Bedienungsanleitung

Technical Specification

Operating Voltage: 8V~16V
Working Temperature: -10°C to 45°C (14°F to 113°F)
Storage Temperature: -20°C to 75°C (-4°F to 167°F)
Clamp Line Length: 556mm (21.89 inch)
Safety Protection: Reverse Polarity Protection

Warranty

TOPDON One Year Limited Warranty
The TOPDON Company warrants to its original purchaser that TOPDON products will be free from
defects in material and workmanship for 12 months from the date of purchase (Warranty Period).
For the defects reported during the Warranty Period, TOPDON will, according to the technical
support analysis and confirmation, either repair or replace the defective part or product.
This limited warranty is void under the following conditions:
Misused, disassembled, altered or repaired by a non-TOPDON technical repair specialist.
Careless handling and violation of operation.
17
Notice: All information in this manual is based on the latest information available at the time of
publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the
right to make changes at any time without notice.

Warnings

DO NOT place the tester near the engine or exhaust pipe to avoid damage from high temperatures.
DO NOT smoke, cause sparks, or strike matches near the battery when testing.
DO NOT remove battery clamps while testing.
DO NOT put the tester into a highly humid or dusty environment.
DO NOT disassemble the tester.
18