Remote Control; Using The Remote Control - Gold Note IS-1000 LINE Bedienungsanleitung

| REMOTE CONTROL

USING THE REMOTE CONTROL

All the functions and features available on
the IS-1000 can be adjusted using the SKC
and the remote. To use the remote, simply
press the Enter key to activate the selection
frame and the IN+ and IN- buttons to move
the frame around the display.
Power ON/OFF
Use POWER ON/OFF to turn ON and OFF the
IS-1000.
Enter
Activates the SELECTION FRAME and selects the
functions, just like you would do by pressing the
knob.
Input selection
Use IN+ and IN- to change the selected input.
Use IN+ and IN- when the SELECTION FRAME is
red (active selection) to change the function and
set the desired value.
Mute
Use MUTE to instantly mute the IS-1000. The input
selection is disabled while IS-1000 is in MUTE.
Volume control
Use VOL+ and VOL- to adjust the volume level by
1 step at a time.
AMP
If the IS-1000 is not responding, please make sure
you have selected AMP on the remote.
Display
Dimmer in 4 steps: Full, 50%, 25%, OFF
19