Description; Technical Data; Safety Instructions; Work Area Safety - Hilti DD-ST150-CCS Bedienungsanleitung

Symbols
Read the
operating
instructions
en
before use.

2. Description

2.1 Use of the product as directed
The DD ST 150 160 CCS is intended for professional
use.
The DD ST 150 160 CCS is intended to be used in
conjunction with the DD ST 150 U CTL or DD ST
160 CTL drill stands for rig-based drilling in mineral
materials using diamond core bits (not suitable for
hand-held use), and particularly for drilling into walls.
Use of the cross-column adapter requires use of a
drill stand, and care must be taken to ensure that the
drill stand is securely fastened to the base material
with an anchor.
Drilling at an oblique angle to the base material is not
permissible.

3. Technical data

Right of technical changes reserved.
Rail length
Weight of cross-column adapter incl. brace
Drilling diameter using the DD 150 U
Drilling diameter using the DD 160

4. Safety instructions

4.1
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious in-
jury. Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
8
Printed: 07.07.2013 | Doc-Nr: PUB / 5071477 / 000 / 00
Observe the information printed in the operating in-
structions concerning operation, care and mainten-
ance.
To avoid the risk of injury, use only genuine Hilti tools
and accessories.
The appliance is designed for professional use and
may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must
be informed of any special hazards that may be en-
countered. The appliance and its ancillary equipment
may present hazards when used incorrectly by un-
trained personnel or when used not as directed.
Nationally applicable industrial safety regulations
must be observed.
Modification of the appliance or tampering with its
parts is not permissible.
927 mm
14.8 kg
Max. 162 mm
Max. 202 mm

4.2 Work area safety

a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
c) Do not work from a ladder.