Adjusting The Ringer Volume; Do Not Disturb - Eaton ExResistTel IP2 Kurz- Betriebsanleitung

Martin
vol. 
06.04.10
Figure 12: Adjusting the Volume
You control the volume of the active mode.
• At the handset mode you control the volume of the speaker of the handset.
• At the listening mode you control the volume of the additional connected speaker
of the phone.
• At the hands free mode you control the volume of the speaker in hands free
mode.
• At the headset mode you control the volume of the speaker of the headset.

2.1.2 Adjusting the Ringer Volume

You can adjust the ringer volume while incoming calls concerning to the actual call type
(internal, external). The ringer volume remains on this level after the call. The "Vol."
indicator shows the current value (see Figure 13).
You can increase the ringer volume level by pressing the key
You can reduce the ringer volume level by pressing the key
Thorsten
Martin
73
vol. 
06.04.10
Figure 13: Adjusting the Ringer Volume

2.1.3 Do not disturb

You can turn off the do not disturb function of the VoIP telephone ResistTel IP2 / IP152
simply by pressing a key, for example if you do not wish to be disturbed during a
meeting.
1. To activate the do not disturb function; press the key
idle mode until the display appears in Figure 14. The telephone reacts to an incoming
call depending on how this feature is configured at the time. For further details on
how to configure the do not disturb feature (see manual).
72
73
14:40 0:22
72
14:40 0:22
.
.
for about a second whilst in
17