Cleaning And Maintenance - Ferm HDM1014 Originalbetriebsanleitung

Mounting
it counterclockwise.
the chuck (4).
position.
it clockwise.
Removing
it counterclockwise.
it clockwise.
Mounting
it counterclockwise.
it clockwise.
Removing
it counterclockwise.
it clockwise.
Mounting and removing the dust collector
The dust collector prevents dust from entering the
machine when drilling into ceilings.
2
Immediately replace a damaged dust
Mounting
chuck (4).
the accessory.
(15) into the chuck (4).
Removing
(15) from the chuck (4).
accessory.
USE
switch (1).
switch (1).
The drill selection switch and the hammer
selection lever must be set according to the
position.
Hints for optimum use
for small workpieces.
machine. Let the machine do the work.
to come to a complete standstill before putting
the machine down.

CLEANING AND MAINTENANCE

4
Before cleaning and maintenance,
always switch off the machine and
remove dust and dirt from the ventilation slots.