Electrical Installation; Tightening Torque For The Mating Connector At An M12 Connector Outlet: 1.0 Nm - SICK AHS36 SSI Betriebsanleitung

OPERATING INSTRUCTIONS
4

Electrical installation

4.1

Tightening torque for the mating connector at an M12 connector outlet: 1.0 Nm

12 O P E R A T I N G I N S T R U C T I O N S | AHS/AHM36 SSI
AHS/AHM36 SSI Inox
When using a programming tool to program programmable encoders (electrical inter‐
face "P"), the operating instructions for the tool must be observed.
When using the PGT-08-S programming tool, make sure that you are always using the
latest version of the SOPAS software and the sdd file.
Operating instructions, software, and the sdd file can be found at www.sick.com.
To do this, please enter the seven-digit part number for the device in question directly in
the „Search" field on the homepage. Click on the relevant search result, and you will be
taken to all the information and files for your device.
8016734/1EF3/2021-12-09 | SICK
Subject to change without notice