Grundig VCR 3130 Bedienungsanleitung Seite 35

3 Operation
3.2.2 Charging with the charging unit
Place the charging unit (14) in
the wall. Remove obstacles that
are within 1-2 meter distance to
the charging unit.
Attach the lead of the charging
adapter (16) to the charging
station.
If the adapter is unplugged or power outage occurs when the appliance is in the charging
unit (14), the appliance will leave the charging stand without a cleaning mode selected and
C
start searching for the charging station.
In this case, turn the appliance off using the power button on the side (6). When the power
outage is over or you plug in the adapter, turn the power on and send the appliance to the
charging unit using the controller (15) or the mobile application and wait for it to settle.
C
The indicator on the appliance will blink in red colour while charging.
C
After completely charging, the indicator on the appliance will remain in blue colour.
C
When the battery is low in standby mode, the indicator will blink twice in a second.
C
When the battery is low in cleaning mode, the appliance will find the charging unit (14)
automatically, indicator will remain constant in red colour.
Robot Vacuum / User's Manual
If the appliance is off, turn it on
by switching the power button
(6) from the "OFF" to "ON"
state.
The blue light on the charging
unit (14) stays lit while the unit
is active.
35 / EN