Shoulder Harness Straps Height - Nuna Pipa Bedienungsanleitung

All manuals and user guides at all-guides.com
Shoulder harness
straps height
adjustment
Use extreme care in threading the Shoulder Harness Straps
according to the figure. If the Shoulder Harness Straps are not
secure, they will not protect your baby.
The ends of the Shoulder Harness Straps must hang in front of
the junction plate.
Ensure that the shoulder harness straps are not twisted before
reassembling the ends onto the junction plate.
1 Press the adjustment button at the front of the seat and pull
on the shoulder harnesses to loosen them.
2 At the back of the seat, take the harness ends off the metal
junction plate.
3 Pull the harnesses through the slots in the seat. Insert them
into the appropriate set of slots.
4 Reassemble the harness ends onto the junction plate.
The ends of the Shoulder Harness Straps have two loops.
For a smaller baby, use the upper shoulder harness loops.
(10)
For a larger baby, use the end shoulder harness loops.
(7)
(6)
(8)
(9)
(11)
24