For Use With Base - Nuna Pipa Bedienungsanleitung

All manuals and user guides at all-guides.com
For use
with base
The Infant Car Seat with Base is a "Semi
Universal ISOFIX Class C and D Child Restraint"
and should be fitted using at 3 point adult
E
seat belt approved to ECE R16 or the ISOFIX
11
XXXXXXXX
connections. Please refer to the Vehicle Fitting
Information at the back of this manual.
For Installation with 3-point-belt
It will fit vehicles fitted with 3-point retractor safety-belts. Seat
positions in other cars may also be suitable to accept this
child restraint. If in doubt, consult either the child restraint
manufacturer or the retailer.
For Installation with ISOFIX System
This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved
to Regulation No. 44, 04 series of amendments for general use
in vehicles fitted with ISOFIX anchorages systems.
It will fit vehicles with positions approved as ISOFIX positions
(as detailed in the vehicle handbook), depending on the
category of the child seat and of the fixture.
The ISOFIX size class for which this device is intended is C
and D.
17