Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27
3
Press the ISOFIX adjustment button to adjust
the ISOFIX connectors. Line up the ISOFIX
connectors with the ISOFIX guides, and then click
both ISOFIX connectors into the ISOFIX anchor
points. (11)
Make sure that both ISOFIX connectors are
securely attached to their ISOFIX anchor points.
There should be two audible clicks and the colors
of the indicators on the both ISOFIX connectors
should be completely green. (11)-1
Check to make sure the base is securely installed
by pulling on the both ISOFIX connectors.
4
After placing the base on the vehicle seat,
extend the load leg to floor (12). When the load
leg indicator shows green means it is installed
correctly, red means it is installed incorrectly.
(12)-2
The load leg has multiple positions. When the
load leg indicator shows red this means the load
leg is in the wrong position.
Make sure the load leg is in full contact with the
vehicle floor pan.
Squeeze the load leg adjustment button, then
shorten the load leg upwards. (12)-1
The completely assembled base is shown as (13).
The ISOFIX connectors must be attached and
locked onto the ISOFIX anchor points. (13)-1
15
ARRA instruction
The load leg must be installed correctly with
green indicator. (13)-2
5
Push the enhanced child restraint down into the
base (14), if the enhanced child restraint is secure,
the shell indicator shows green. (15)
Pull up on the enhanced child restraint to be sure
it is securely latched into the base.
6
Press the ISOFIX adjustment button (16)-1, and
push the base back against the vehicle seat until
tight. (16)-2
7
To remove the enhanced child restraint, lift the
enhanced child restraint off (17)-2 while pressing
the enhanced child restraint adjustment button.
(17)-1
8
To remove the base, press the secondary lock
button (18)-1 first and then the button (18)-2 on
the ISOFIX connectors before removing the base
from the vehicle seat. (18)

Height Adjustment

for Head Support and Shoulder Harnesses
Check that shoulder harness straps are set at the
proper height. Please choose the proper pair of
shoulder harness according to the child's height.
ARRA instruction
16

Quicklinks ausblenden:

Werbung

loading