For Use With Base; Parts List - Nuna pipa next base Bedienungsanleitung

For Use with Base

PIPA next
40cm-83cm / ≤13kg
i-Size
universal
ISOFIX
R129-030526
UN Regulation
No.129/03
PIPA next + Base
R129-030526
1
- "i-Size" (Integral Universal ISOFIX Enhanced Child Restraint Systems)
is a category of Enhanced Child Restraint System primarily designed for
use in all i-Size seating position of a vehicle.
2
- According to the UN Regulation No. 129, the Enhanced Child Restraint
with base is a Universal ISOFIX ISO/R2 Enhanced Child Restraint and
should be fitted using the ISOFIX connections.
3
- This is an "i-Size" Enhanced Child Restraint System. It is approved
according to UN Regulation No. 129, for use in, i-Size compatible vehicle
seating positions as indicated by vehicle manufacturers in the vehicle
users' manual.
4
- If in doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer.
WARNING
Failure to follow these warnings and instructions could result in
serious injury or death.
For proper protection of your child, it is important to use and install PIPA next
base according to the instructions given in this manual.
This short instruction is for overview only. For maximum protection and
complete information it is essential to read and follow the instruction manual
of PIPA next carefully.
PIPA next base is only compatible with PIPA next car seat.
3
PIPA next base instructions

Parts List

Make sure all parts are available before assembly. The infant carrier module
and base can be sold separately. If any part is missing, please contact Nuna.
No tools are required for assembly.
1 ISOFIX Connector
2 ISOFIX Guides
3 Load Leg Adjust Button
4
Side Impact Shield
5 ISOFIX Adjust Button
5
1
2
6 Infant Carrier Module Release
Button
7 Load Leg Indicator
8 Instruction Manual Storage
Compartment
6
4
7
8
3
4
PIPA next base instructions