For Use With Base; Parts List - Nuna Pipa Gebrauchsanweisung

For use
with base
The Infant Car Seat with Base is a "Semi
ECE.R44/04
Universal ISOFIX Class C and D Child Restraint"
SEMI-
UNIVERSAL
and should be fitted using at 3 point adult
0-
seat belt approved to ECE R16 or the ISOFIX
connections. Please refer to the Vehicle Fitting
XXXXXX
Information at the back of this manual.
For Installation with 3-point-belt
It will fit vehicles fitted with 3-point retractor safety-belts. It is
approved to Regulation No. 44, 04 series of amendments for
general use in vehicles fitted with 3-point-belt. Seat positions in
other cars may also be suitable to accept this child restraint. If
in doubt, consult either the child restraint manufacturer or the
retailer.
For Installation with ISOFIX System
This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved
to Regulation No. 44, 04 series of amendments for general use
in vehicles fitted with ISOFIX anchorages systems.
It will fit vehicles with positions approved as ISOFIX positions
(as detailed in the vehicle handbook), depending on the
category of the child seat and of the fixture.
The ISOFIX size class for which this device is intended is C
and D.
17

Parts list

1 Seat Pad
2 Side Guides
3 Infant Insert
4 Adjustment Webbing
5 Adjustment Button
6 Safety Buckle
7 Shoulder Harness Straps
8 Canopy Mount
9 Canopy
10 Handle
11 Handle Button
1
2
3
8
4
7
6
5
14
12 Rear Guide
13 Stroller Release Handle
14 ISOFIX Connector
15 Shell Indicator
16 ISOFIX Guides
17 Load Leg
18 Load Leg Indicator
19 Load Leg Adjust Button
20 Car Seat Release Button
21 Lock-off
10
9
11
12
21
20
15
19
16
17
18
13
18