Quick Network Setup - Eneo IPD-73M2812MWA Schnellinstallationsanleitung

4. Search for and connect to the Wi-Fi generated by the camera.
i The Password is the cameras MAC address. Please check the MAC address label on
the camera!
5. Open the web browser and access 192.168.125.1 (default IP address for Wi-Fi). The
log-in page will open up. Please enter default user name (admin) and password
(admin).
i Wi-Fi access is only for easy installation and service purpose. Please be advised that
camera cannot work through Wi-Fi.
Wi-Fi dongle connector and Wi-Fi dongle are not included in this camera package.
i
12
All manuals and user guides at all-guides.com

Quick Network Setup

1. After the camera ist connected to the network, start 'eneo Scan Device' tool (en-
2. Use the 'Scan eneo' button to find the camera in your network.
3.
4. Right clicking the device name in the eneo Scan Device tool will bring up the
5. The web viewer login page will open up in your default web browser.
6. Use the default user name and password to log in.
Default user name: admin
Default password: admin
closed CD).
By default the camera is set to DHCP. If there is no DHCP server present in the net-
work the camera will fall back to a default IP address after a while. In this scenario
please only add one camera at a time to the network to avoid conflicts due to
identical IP addresses.
The network camera's default IP address is: 192.168.1.10.
context menu. Use the 'Open Device Web Site' option to access the camera.
In case of Microsoft Internet Explorer install Active-X named VIDEOR E. Hartig
GmbH according to the instruction at the bottom of the browser.
EN
13