Cleaning; Troubleshooting; Disposal; Technical Data - Lux Tools E-MUS-21 Originalbetriebsanleitung

– Switch on the product and press it against the sur-
face to be sanded applying even pressure.
– Always use constant motion and only use light
pressure.

Cleaning

DANGER! Risk of injury! Before all work
on the device, disconnect the mains plug.
Cleaning at a glance
Regularly, depending on the conditions of use
What?
Clean dust from the mo-
tor's ventilation slots.
Clean the device.
Empty the dust container
Note: Always empty the dust collector to
ensure optimum dust collection.
► P. 3, item 2
Fault/malfunction
Product not running.
Sanding power too low.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Disposal

Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
How?
Use a vacuum cleaner,
brush or paintbrush.
Wipe the device with a
slightly damp cloth.
Cause
Device defective?
Is the sanding disc not suitable for
material?
Sanding disc worn out?
– Pull the dust collector (2) fully away from the rear
of the device.
► P. 4, item 3
– Press the unlock push butons (5) and keep them
pressed.
– Remove the lid (6) from the dust collector.
► P. 4, item 4
– Remove the filter mat (7).
– Empty the dust container.
– Re-install the dust container in reverse order. Pay
attention to the correct position of the filter mat.

Troubleshooting

If something doesn't work...
DANGER! Risk of injury! Improper repairs
can result in the product functioning
unsafely. This endangers yourself and your
environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
Contact your local vendor.
Replace the sanding disc (► Attach
the sanding disc – p. 22).
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.

Technical data

Material number
Rated voltage
Rated output
Idling speed
Protection class
Dimensions of the sanding
disc
Sound power level (L
WA
Sound pressure level (L
Vibration**
*) The specified values are emission values and do not necessarily represent
safe workplace values. Although there is a correlation between emission
and immission levels, this cannot be used to infer whether additional safety
measures are necessary or not. Factors which affect the current immission
levels at the workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes taking place in
the vicinity. Permitted workplace values can differ from country to country.
This information is designed to help the user to better assess the dangers
and risks. Determination of noise emission values in accordance with
EN 62841-1.
**) The specified vibration emission value was measured in accordance with a
normed test procedure and can be used in order to compare one tool with
another. The specified vibration emission value can also be used for an
GB
380460
230 V~, 50 Hz
130 W
−1
13000 min
II
140 × 140 × 80 mm
)* 87 dB(A)
(K = 3 dB(A))
)* 76 dB(A)
PA
(K = 3 dB(A))
< 3,017 m/s²
(K = 1,5 m/s²)
23