Remote Control Operation - Skandika V3000 Bedienungsanleitung

REMOTE CONTROL OPERATION

Remote control operation
The effective transmissi-
on range of the remote
control is 2,5 m.
Inserting / replacing the battery (battery type CR2032):
The battery compartment of the remote control is located on the back. If the unit no longer
responds to the remote control, replace the button cell battery with a new one.
Bluetooth -transmission for music:
®
In order to listen to music from the speaker of the V 3000 via your smartphone or tablet,
search for the vibration plate („SKANDIKA") through the Bluetooth
device. Then connect both devices (pairing). You can control the volume with your smartpho-
ne/tablet.
22
1. Program button: Enables automatic mode.
By repeatedly pressing the button, the various programs can be
selected:
P1: 3D-Oscillation and vibration
P2: 3D-vibrations (oscillating and linear)
P3: 3D-vibration and linear movements
Hint: In auto mode, time and speed cannot be adjusted, because
these are fixed (check the program tables).
2. On/Off button: Switch the device on / off.
3. Time adjustment
4. MODE button: Choose one of the seven main function mo-
des of the device (by repeatedly pressing the button):
1. Oscillation / 2. Vibration / 3. Linear
4. Oscillation and vibration / 5. Oscillation and linear
6. Vibration and linear
7. Oscillation and vibration and linear
Hint: The time value can only be adjusted in manual or standby
mode. While exercising, you may only adjust the speed (but not
the time).
5. Activating or deactivating the unit buttons (on the control
panel)
6. Switch acoustic signals on/off
7. Speed buttons: Adjust the speed (level 1-60).
8. Start/Stop button: Starts/stops the selected preset pro-
gramme in programme mode or a customised workout in ma-
nual mode.
settings of your mobile
®